Product Description

WP worm gearbox is a new technology solution developed by our manufacturing unit on the basis of strengthening WJ collection products and combining superior technologies at property and abroad. The physical appearance adopts sophisticated sq. box composition. Its shell is created of higher quality cast iron. Modest quantity, light weight, higher radiation effectiveness, higher output torque, easy procedure, lower sound. It fits all positions.
The merchandise are broadly used in the producing equipments of all varieties of industries within and outside China. They are the very best choices for nowadays modern facilities of mechanical lowering generate handle to realize large twisting length, huge gear ratio, small noise, large effectiveness and security.
one. Characteristics:
one) Higher quality aluminum alloy Motovario like equipment box, mild excess weight and non-rusting
two) Big output torque, steady transmission with decrease noise
three) Substantial warmth-radiating deficiency, stylish condition, tough support daily life and little dimensions
four) Suited for omni-bearing set up
2. Advantages:
1) Smooth in running and little in volume 
2) Substantial in radiating efficiency 
3) Durable in provider life 
four) Work long time in dreadful condition 
five) Totally sealed and non-rusting
3. Set up
one)The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3)The diameter tolerance zone of input and output shaft is H6, the holes of fitness(such as couplings, belt-pulley, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
four)Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
five)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6)When ordering or using all kinds of WPD type, if the motor weight is binger than the common, supporting set is required.
4. Utilization
Before using,please check carefully whether the reducer model, distance, ratio, input connecting method, 
output shaft structure, input and output shaft direction and revolving direction accord with required.

Technological knowledge: 
Torque: 2N.m-3571N.m 
Enter speed: 1000r/min, 1500r/min 
Output pace: .thirty-419r/min 
Electricity: .04KW-15KW

WP reducer, divided into common WPS collection, standard WPD sequence, regular WPA, WPO,WPDA,WPDO,WPDS,WPDS and so on. WP worm equipment and worm reducer is designed on the basis of WD reducer, the worm is manufactured of forty five # higher top quality metal following heat treatment method processing and production, worm gear with tin bronze forged, put on-resisting efficiency is very good, specially on the bearing ability is more evident, worm equipment and worm reducer is mainly used in plastics, metallurgy, beverage, mining, lifting transportation, chemical reduction drive design and other mechanical gear.
Advantages
1.Easy transmission, vibration, impact and sound are little, velocity reduction ratio, vast versatility, can be employed with a variety of mechanical equipment.
two.Can be a single stage of transmission to acquire a larger transmission ratio, compact structure, most versions of reducer has a good self-locking, braking requirements of mechanical equipment can help save the braking gadget
three.worm tooth tooth meshing friction reduction is massive, so the transmission effectiveness is lower than the gear, effortless to warmth and large temperature.
4.Larger demands for lubrication and cooling.
5.Excellent mutual compatibility, worm gear and worm are made according to countrywide specifications, bearings, oil seals and other common parts.
six.The box human body sort involves standard type (the box human body is vertical or horizontal kind with foot board) and common variety (the box physique is cuboid, with fastened screw holes on a number of sides, without foot board or one more foot board, and many others.).
seven. There are 2 relationship modes of input shaft: basic variety (single enter shaft and double input shaft) and motor flange.
8. The position path of the output and input axes is below and previously mentioned the input axes Output shaft up and down Input axis up and down.
nine. Two or 3 reducer sets can be utilised to sort a multistage reducer to get a greatest transmission ratio.
 

###

###

###

###

###

###

###

###

A-Drive PWC single worm reducer

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducers. As a result, worm gears continue to be popular with engineers.

Agknx driver

Conical drive worm reducers are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducers are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm Reducer Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducers are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducers are ideal for a variety of applications.
RV series worm gear reducer is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducers have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducers are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
AGknx Single

Worm reducers can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducers work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducers have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducers can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducers are also susceptible to thermal stress. They run hotter than hypoid reducers, which reduces their useful life. In addition to higher heat, worm reducers can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
AGknx X & H

The AGknx X & H worm gear reducer series is a high-performance universal mount worm gear reducer. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

editor by czh 2022-12-01