General Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is made to operate materials managing tools. The reducing motion is achived from the solenoid valve with all the decreasing pace managed by an adjustable needle valve. The left and appropriate functions are outfitted with 
a dual pilot operated test valve and cross-over relief valves.
Remark: Please talk to our income engineer for the different pump displacement, motor energy or tank capability.
Particular Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean the many hydraulic elements concerned just before set up of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities.N46 hydraulic oil is suggested.
four. This energy unit needs to be mounted horizontal.
five. Check the oil level within the tank after the very first get started with the electrical power unit.
six. Oil shifting is needed after the initial 100 operation hours, afterwards when just about every 3000 hrs.
