Materials Managing Energy UNIT one
Basic Description
This energy unit is intended for the fork lift marketplace, consisting of remarkably effective gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down movement are managed by the lever on the manual release valve, which can be outfitted with an electrical switch to activate the motor. The lowing pace is managed through the strain compensated flow handle valve.
Special Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic components concerned prior to installation of the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and absolutely free of impurities, N46 hydraulic oil is recommended .
4. Oil altering is required immediately after the original a hundred operation hrs, afterwards once every single 3000 hrs.
five. The power unit proven is created to be mounted horizontally.

Material Dealing with Electrical power UNIT two
Standard Description
This energy unit attributes power up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing movement is activated by the solenoid valve using the decreasing speed controlled from the pressure compensated flow control valve. Merchandise of this series may be broadly utilized in the market of logistic devices for example fork lift, mini lift table, and so on.
Unique Notes
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned ahead of mounting the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
4. Oil shifting is required right after the initial one hundred operation hrs,afterwards the moment every single 3000 hrs.
five. The electrical power unit should be mounted horizontally.