1.A connecting link of an O-ring Chain for basic application is pre-coated with grease in the pins. Just before connection, verify the grease about the surfaces of pins, and if your amount of grease is tiny, apply grease with bare hands. (If gloves are employed, the grease is going to be absorbed through the gloves.)
Example: When the connecting hyperlink (I) of an O-ring chain for basic application is
shipped, O-rings are fitted in the roots in the pins. If your O-rings come loose as a consequence of vibration through transport, refit the O-rings in towards the roots from the pins.
In this case, make sure to return the grease collected in the roots of the pins to the central surfaces from the pins, far more at portion A than at portions B shown in the above illustration. (Portions A is worn due to sliding using the bushings.)
2.The chain might be most easily linked to the teeth of a sprocket. Engage the links at each ends in the chain with the sprocket teeth and fit connecting pins. In case the sprocket may be moved, the chain can also be connected on the loosened side.
three. Connecting method
one.Verify that O-rings are connected for the roots of your pins.
2.In case the quantity of grease applied on the connecting pins is modest, coat the pins with grease in the central portions.
three.Insert the connecting pins in to the bushings with the inner back links at the two ends.
4.Confirm that the grease is utilized to your entire face of the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and when pressing the connecting plate, install the spring clip. Confirm whether the head (the finish with no split) on the spring clip is turned while in the feeding route in the chain. (See the following illustration.)
6.You should definitely confirm that the spring clip is securely fitted inside the clip grooves on the connecting pins.
This completes jointing on the connecting hyperlink. Note that grease over the surfaces of connecting pins and O-rings could be removed through set up perform. In this instance, re-grease working with the grease within the surface with the base chain or even the grease while in the polyethylene bag during which the connecting hyperlink was contained.